At noon, a solar power plant can export its generation immediately or divert some of it into a battery for later delivery. By evening, the same operator may have to choose between discharging into a higher-priced period, using the battery to cover a forecast shortfall, or keeping energy available for a later commitment. Each decision changes what the battery can do next.

Battery energy storage system (BESS) optimization starts with a comparison of those choices. For a solar portfolio, the relevant inputs are expected production, achievable market prices, battery state of charge and the limits at the point of connection. The objective is to choose the best feasible use of the battery across several delivery intervals, taking existing commitments into account.

When does charging a battery with solar power make sense?

Start by asking what would happen to the electricity without charging. If the plant could export it at noon, storing it means giving up that sale. The value of the later delivery needs to cover the forgone revenue, the energy lost in storage and any additional costs that apply to the cycle. If export is constrained and the energy would otherwise be curtailed, the forgone sale may be smaller. The result still depends on whether the system can capture that generation and export it later.

Charging also uses space in the battery. Filling it early in the day can leave too little room to absorb a larger solar surplus later. On the other hand, keeping too much space available can leave the operator short of energy for an evening delivery if cloud cover reduces afternoon generation. Use the solar forecast to decide how much room to keep and when to revisit the plan. The companion article on solar power forecasting and imbalance costs explains how forecast revisions can change the position after a sale is made.

Check how much energy the battery can take

Battery power and energy answer different questions. Power, measured in MW, limits how quickly the battery can charge or discharge. Energy, measured in MWh, determines how much it can store or deliver over time. A 2 MW charging limit permits at most 1 MWh of charging input in a 30-minute interval, even if the battery has room for several more MWh. Operating limits or a shared connection can reduce the feasible volume further.

When is the right time to discharge?

The highest forecast price is a starting point. Compare it with the price the portfolio can actually achieve, the volume it can deliver in that interval and the value of preserving energy for the next one. At a site with a shared export limit, concurrent solar output can reduce the room available for battery discharge. An attractive price period may therefore accommodate only part of the planned delivery.

Existing commitments also change the decision. If the portfolio has already sold energy for a later interval and updated solar forecasts indicate a shortfall, retaining charge can give the trader a way to cover part of it. Compare that option with the cost of adjusting the trading position and the value of selling the stored energy earlier. The same MWh cannot serve both purposes.

A worked example of solar battery dispatch

Assume a solar farm has 5 MWh available at noon. It can sell that energy at an illustrative price of €40/MWh or charge a battery and sell the resulting output in the evening. Assume an 88% round-trip efficiency measured on a consistent input and output basis, enough battery capacity and export headroom, and an achievable evening price of €85/MWh.

Battery storage cabinets next to rows of solar panels

/

  • Sell at noon. 5 MWh × €40/MWh yields €200.
  • Store and sell in the evening. 5 MWh × 88% yields 4.4 MWh for export. At €85/MWh, the evening sale yields €374.
  • Compare the two options. The difference is €174 before additional cycling costs, fees and other charges. If those incremental costs total €35 for the example, the difference falls to €139.

Under these assumptions, the evening price needs to exceed roughly €53.41/MWh to cover the €200 forgone sale and €35 of incremental costs on 4.4 MWh of output. This is a simplified dispatch comparison. A full investment assessment would include capital costs, operating costs and a range of operating conditions over the life of the asset.

Update the decision when the forecast changes

Suppose the achievable evening price falls to €50/MWh before the charging decision is made. Selling 4.4 MWh then would yield €220. After the assumed €35 in incremental costs, the storage route brings in €185, which is €15 below the immediate sale. If the battery is already charged when the price changes, the noon sale is no longer available. The operator then compares the remaining options, such as discharging now, holding charge for a later interval or using it to meet a commitment.

What should a BESS optimization workflow track?

Build the dispatch plan around a common timeline. Each delivery interval should show expected solar output, expected prices, scheduled trades, state of charge, available battery power and export headroom. Aligning those inputs makes it easier to spot a plan that looks attractive in the market forecast but exceeds a physical limit at the site.

  • Before the operating day. Estimate generation and price scenarios. Set an initial charge and discharge plan, with room to respond if production or prices differ from expectations.
  • During the day. Refresh the plan when new forecasts or live asset data change the decision. Check whether the planned volume can still fit within both battery and connection limits.
  • After delivery. Compare metered charging and discharging with the schedule, reconcile trades and review actual losses and costs. Use that record to improve the assumptions for the next cycle.

Across Serbia, Croatia, Bosnia and Herzegovina, Montenegro and North Macedonia, portfolio teams can apply this same decision framework. The inputs should reflect the site’s own metering arrangements, market access, trading deadlines and contractual commitments. Those details determine which prices and delivery options the operator can use in a real dispatch plan.

Keep operating limits separate from commercial assumptions

The dispatch plan should distinguish between a constraint the operator must respect and a market assumption that may change. A minimum state of charge, for example, can restrict how much energy the battery has available for trading. An expected evening price is an input to the decision and can be revised as the market moves. Recording these separately helps the operator see why a proposed dispatch changed and whether the earlier plan was ever feasible.

It also helps to check how the battery performed over comparable cycles. Compare metered charging input and discharged output over a complete cycle and use a consistent measurement boundary. Review periods with unusually high auxiliary consumption or interrupted dispatch separately. The goal is to use assumptions that reflect the site’s operating record, so that a forecast margin can be compared with the margin the portfolio actually realized. When the two diverge, the team can investigate whether prices, losses, available power or the trading schedule drove the difference.

Managing solar and battery assets from one platform

The Benjo Energy Management Platform brings generation forecasts, market price forecasts, live monitoring and battery optimization together. A portfolio team can use those inputs to review expected solar production alongside available storage flexibility and update its plan as operating conditions change. To discuss the requirements of a solar and storage portfolio, contact Benjo Energy.